Lexmark E260dn Network-Ready Monochrome Laser Printer (34S0300) Reviews
4inkjets.com is the best and most reliable ink cartridge company of them all – without a doubt! If you need quality service, 100% quality printer ink , competitive pricing, then there’s only one company – 4inkjets.com: 4inkjets.com
printer ink refill lexmark 2
Video Rating: 0 / 5
Lexmark E260dn Network-Ready Monochrome Laser Printer (34S0300)
- Borderless Printing - No
- Catalog Publishing Type - Printers-Laser/Solid Ink
- Compliance, Standards - ENERGY STAR Qualified
- Connector/Port/Interface - Ethernet, USB
- Depth - 16 1/2 in
Lexmark E260DN Monochrome Laser Printer is Quiet; as low as 48 dBA in Quiet Mode. It has a Sleek new contemporary design and is Compact at just 14.55 x 15.98 x 10.2 inches.
Rating: 
(out of 12 reviews)
List Price: $ 229.99
Price: Too low to display
Question by Bluebabygirl: I need help with my Lexmark printer it is a X1195?
My Lexmark printer is not printing right it is printing out red can you please help me with this it is almost a new color cartridge.
Thank you for your help.
Best answer:
Answer by aurelian1_1
go to start - printer and faxes - right click with your printer - preferences(printing preferences) - settings -load factory settings - ok . close all and try to print again .
good luck !
Give your answer to this question below!
Tagged with: 34S0300 • E260dn • Laser • lexmark • Monochrome • NetworkReady • printer • Reviews
Filed under: lexmark printer
#1 Ink cartridges Online Store:
4inkjets.com - The #1 cheap ink cartridges online store Buy here
To read the complete review - Cheap printer ink cartridges Review
Review by Sanford Imhoff for Lexmark E260dn Network-Ready Monochrome Laser Printer (34S0300)
Rating:
Just a comment on the paper jam light when using manual feed. If you press the red ‘X’ button when the jam light appears it clears the light and you can then print the next whatever. Lexmark’s commercial grade lasers function the same way in that each page/envelope has to be cleared when using manual feed. It isn’t a defect..its just the way the manual feed works.
I was an unfortunate owner of the infamous HP P2015dn and went through two formatter boards before giving up on it and moving on to the E260dn.
I haven’t had the printer long enough to comment on its longevity but I can say this is a superior printer to the HP (all HP problems aside). Faster to first print, faster printing sheet for sheet, much better duplexing and better software in general. Print quality is about the same. Both are quiet although the Lexmark is quicker to shut down its processing. The HP did have a better envelope/manual feed.
Now, for an embarrassing acknowledgment but also a statement on Lexmark service. It had been so long since I performed a firmware upgrade I forgot the printer must be connected through a USB cable (not network) in order to flash. So, trying to update through a network connection thoroughly messed things up. I contacted Lexmark customer service and was very impressed. Connected with tech support in about a minute. After trying different processes to see if the firmware could be salvaged they stated the printer would need to be exchanged for a new one. They willingly shipped the new printer to my place of work so I could sign for it and it arrived the following AM as promised. Lexmark’s warranty on this printer is one year, next-day exchange.
Thus far, this is a printer I would highly recommend for home or small business use based on my experience. Understand the ‘paper jam’ light is a function of manual feed and not a defect per se.
Review by Robert E. Alexander for Lexmark E260dn Network-Ready Monochrome Laser Printer (34S0300)
Rating:
My previous printer was a Lexmark e210, an entry level laser. Compared to that, I’m delighted with the e260dn. I love its speed (the warm-up time is so much shorter than the e210), I love the network connection so that all my family’s desktops and laptops can use it, and I love the double sided printing.
I leave it on 24/7. It uses 10 watts of electricity when idle - 50% more than a night light. I figure that’s about $20/year.
My complaints are with the paper feed. First, I get frequent jams. Maybe I’m just not keeping the paper bin full enough, because that’s where most jams happen. It’s tolerable for a home office, but I wouldn’t recommend it for a bigger business.
Second, the way the envelope feed works is that you send the print job to the printer, it displays a yellow light, then you put the envelope in. Having the envelope there before you send the job won’t work. Again, that’s OK in the home but not at a big office.
Review by Robert Paxton for Lexmark E260dn Network-Ready Monochrome Laser Printer (34S0300)
Rating:
The good parts:
- Absolutely silent at idle, reasonably quiet in operation.
- FAST! Its warm-up time is very quick, documents come across the network very quickly, and the print speed is wonderful.
- Great main tray paper handling…no jams, and the duplexer works perfectly.
- Easy to set up. The wizard on the setup disc worked very well, and it’s nice to be able to point your browser at the printer to get a complete status readout without wasting a page printing it out.
The bad part:
- The manual feed is worthless, as other reviewers have said. I’m currently hand-writing addresses on envelopes, which does not make me happy. The rollers grip and pull an envelope into the machine just fine, but then the paper jam light comes on and it’s all over. My hope is a firmware update fixes it…someday…
* 9/18/09 UPDATE *
Still works perfectly as mentioned above, except for the manual feed - - which is still worthless. I’m still addressing envelopes by hand.
Review by L. Graf for Lexmark E260dn Network-Ready Monochrome Laser Printer (34S0300)
Rating:
This printer is easy to set up and produces good quality print. I haven’t had the other reviewers’ problems with the manual feed of envelopes, and the Lexmark handles automatic paper feed with ease. One thing I don’t like about it is that the on-off switch is in back rather than on the side. Given my computer set-up, this means an awkward stretch for me every time I turn the printer on or off.
The toner cartridge is easy to insert and remove, and the print it produces is sharp and dark and doesn’t smudge. My main beef with the Lexmark lies with its voracious appetite for toner. At the default settings the cartridge gets used up in less than the advertised maximum 3500 pages — not good if you regularly print a lot, often hundreds of pages a day, as I do.
However, you can ameliorate this problem by adjusting the settings. In Printer Preferences click on Print Quality, there click on Custom, and then slide the indicator arrow from 10 to at least 5, which in my experience provides a good sharp dark print. The quality will be acceptable for drafts even at 3 and the cartridge life will be greatly extended.
Overall it’s a definite improvement over my ancient HP 2200 laser, and overall I think it was a good purchase. But keep these drawbacks in mind as you consider whether it will work for you.
Review by Reads Galor for Lexmark E260dn Network-Ready Monochrome Laser Printer (34S0300)
Rating:
Like another reviewer, I had trouble with the manual feed and then a start-up issue. It did take a couple of calls to tech support to determine what was actually causing the problems. Removal of the software that came with the printer and installing drivers from the website settled the problems for my computer quite nicely. Tech Support was some of the best I’ve encountered over the many years I’ve used computers. The support people were friendly, patient and very competent. The printer is great! Although it is monochrome, images are crisp and clear in black and white and text quality rivals any high-priced printer I’ve used. It is fast and quiet (I can print in the middle of the night without disturbing sleeping family). My only wish is that it had an 8.5×14 drawer. After installing the new software, I have no problems with manual feed!
Hello. The cartridge may not be seated properly in the carrier or just needs cleaning. Here’s an article in the Lexmark website that will show you the proper way to clean the nozzles of the cartidge. Just go to this link: http://bit.ly/bDbYID . Or you can try another cartridge, if you stil have one. Hope this helps. Good luck.